- Lamphead S60-C
- Optical System: Soft Diffusion Panel
- Light Aperture: 645 x 300 mm / 25.4 x 11.8"
- Beam Angle: 115º (Half Peak Angle)
- Weight: Manual Version: approx. 13 kg / 29 lbs
- Pole Op Version: approx. 14 kg / 31 lbs
- Packed Weight: Manual Version: approx. 21 kg / 46 lbs
- Pole Op Version: approx. 22 kg / 49 lbs
- Size w/ spigot (H x W x L): 566 x 133 x 825 mm / 22.3 x 5.2 x 32.5"
- Size w/o spigot (H x W x L): 433 x 133 x 825 mm / 17 x 5.2 x 32.5"
- Packed Size (H x W x L): 460 x 300 x 856 mm / 18 x 11.8 x 33.7"
- Handling: Aluminium Yoke, High Strength Tilt Lock
- Pole Operation Option (Pan & Tilt)
- Mounting: 28 mm Spigot (Junior Pin)
- Tilt Angle: +/- 90º
- Lamphead Voltage Input: 48 V DC
- Power Consumption: 420 W Nominal, 450 W Maximum
- Lamphead Power Connection: Male 3-Pin XLR - 15 Amp (Pin 1: Negative / Pin 2: Positive)
- Battery Connector: Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive)
- Battery DC Voltage Range: 23 to 36 V DC
- Battery Mode Light Output: 50 % of total output
- White Light: 2,800 K to 10,000 K continuously variable correlated color temperature
- Colored Light: Full RBG+W Color Gamut with Hue and Saturation Control
- Color Temperature Tolerance: +/-100 K (nominal), +/-1/8 Green-Magenta (nominal)
- Color Rendition: CRI Average > 95
- TLCI Average > 90
- Green-Magenta Adjustment: Continuously adjustable (Full Minusgreen to Full Plusgreen)
- Dimming: 0 to 100 % continuous
- Control: On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN network connectivity, USB-A, Art-Net
- Remote Device Management (RDM*): DMX Setup, Hour Counter and Standard RDM Commands
- Software Interface: Ethernet: DMX Setup, Fixture Status and Firmware Upgrade through PC, Mac USB-A: Software upgrade via flash drive
- Housing Color: Blue/Silver, Black
- Ambient Temperature Operation: -20 to +45ºC / -4 to +113ºF
- Protection Class / IP Rating: III / IP20
- Estimated LED Lifetime (L70): 50,000 hours
- Estimated Color Shift Over Liftetime +/- 5 %
- Certifications: CE, CB, ENEC, cNRTLus, FCC, PSE

- Power Supply Unit S60 PSU
- Power Supply Input Range: 110 to 240 V ~, 50/60 Hz
- Power Supply Output Range: 48 V DC
- Power Input Connection: powerCON TRUE1 (Bare Ends / Schuko / Edison cables available)
- Power Output Connection: Female 3-Pin XLR - 10 Amp (Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through)
- Weight: 3.5 kg / 7.7 lbs
- Dimension: 383 x 191 x 91 mm / 15 x 7.5 x 3.6"
- Control: On-Board On/Off Switch
- Mounting: SkyPanel PSU Super Clamp Adapter / Rail Mount Adapter
- Certifications: CE, CB, ENEC, cNRTLus, PSE